Section Four
INTERRUPT= <interrupt level>
| Description: Set the interrupt level |
| Default: 5 or AUTO |
| Accepted values: Any valid interrupt value excluding 0, 1, 2, 6, 8, and 13 |
Note: | If this keyword exists, the driver will return an error if unable to operate |
| using the specified interrupt. If the keyword does not exist, the default |
| interrupt level will be 5 if Card Services is not present; otherwise the |
| first available interrupt obtained from Card Services will be used. |
IOBASE= <I/O port>
| Description: Set the I/O port |
| Default: 300 or AUTO |
| Accepted values: Any location within a 64 port boundary (300 and up in |
| increments of 40, with the upper limit dictated by the individual machine) |
Note: | If this keyword exists, the driver will return an error if unable to operate |
| using the specified I/O port. If the keyword does not exist, the default I/ |
| O port will be 300 if Card Services is not present; otherwise the first |
| available I/O port obtained from Card Services will be used. |
NETADDRESS= <‘nnnnnnnnnnnn’>
Description: Station address used to override the default PROM value.
Default: None ( driver uses PROM)
Accepted values: Valid hexadecimal for a Station Address according to Ethernet pattern.
SOCKET= <socket number>
| Description: Enable operation with PCMCIA socket indicated |
| Default: Auto |
| Accepted values: 1, 2, or Auto |
Note: | Specifying a socket number will limit the driver to only checking that |
| socket for the presence of a Trumpcard. |
MAXTRANSMITS= <transmits>
Description: Maximum transmit queue blocks
Default: 4
Accepted values: Any value between
4 - 6 | Trumpcard Ethernet LAN |
