Operation
2.When prompted for ‘INSTALL NEW NETWORK ADAPTER’, select ‘Unlisted’ or ‘Updated Network Adapter’.
3.When prompted to ‘INSERT NETWORK DRIVER DISKETTE IN DRIVE A:’ , place the Trumpcard driver diskette in drive A.
4.For WFW 3.1 enter
A:\WFW\31
For WFW 3.11 enter
A:\WFW\311
If you have used the configuration software to configure the Network driver diskette use the default A:\
Then select ‘OK’.
5.Select ‘OSITECH TRUMPCARD’ from menu.
6.Continue with installation until complete.
If you have setup to use both the WFW 3.11 and Novell ODI, the following example shows the PROTOCOL.INI, CONFIG.SYS, AUTOEXEC.BAT and NET.CFG file changes made during the installation of Windows for Workgroups version 3.11.
Your PROTOCOL.INI file under the Windows directory should contain the following :
[Network.setup]
version=0x3110
netcard=osi$otceth,1,OSI$OTCETH,4 netcard=ms$odimac,1,MS$ODIMAC,4 transport=ms$nwlinknb, NWLINK transport=ms$netbeui, NETBEUI lana0=osi$otceth,1,ms$netbeui lana1=ms$odimac,1,ms$netbeui lana2=osi$otceth,1,ms$nwlinknb
[net.cfg]
PATH=C:\NOVELL\NET.CFG
[OSI$OTCETH]
[LINK DRIVER OTCETH] [Link Driver XXXX]
[Link Support]
NewMaxBoards=Max Boards 8
OldMaxBoards=Max Boards 8
User’s Guide and Reference | 3 - 11 |
