Section Three
Loading the DOS ODI Driver
| The DOS ODI driver OTCETH.COM for the Trumpcard PC Card is an |
| executable DOS TSR (Terminate and Stay Resident) program. |
| It must be loaded always after the LSL (Link Support Layer) module and |
| before the IPXODI (IPX Stack Protocol). |
| An example of a possible AUTOEXEC.BAT file allowing the loading of |
| necessary modules to establish a link from a DOS Workstation to a |
| Netware Server is: |
| LSL |
| OTCETH |
| IPXODI |
| NETX or VLM |
Note: | If your Ethernet frame type is NOT 802.2, you must use the NET.CFG |
| file to supply the appropriate frame type. The OTCETH driver will |
| default to 802.2 in accordance with Novell's specifications. |
Note: | Keyword specifications associated with the ODI drivers are explained |
| in Appendix A, Error Messages in Appendix C. |
Novell Netware for OS/2
When installing Netware for OS/2, you may use the automatic installation for the Ositech Trumpcard ODI device driver.
Netware 3.x and 4.x
1.Follow the instructions in the Netware Requester for OS/2 manual on how to Install and Configure the Novell Netware OS/2 Requester.
2.During installation of the requester, when prompted for the Network Interface Card Driver, enter OTCETH.SYS.
3.The installation utility will confirm if this is a third party NIC driver, enter YES
4.When prompted to enter the file to install, enter
A:\NETWARE\OS2\OTCETH.SYS
Insert the Trumpcard driver diskette into Drive A.
5.Continue with the Netware requester installation, the final step will be to configure the NET.CFG file. See Appendix A for ODI keywords.
End of Installation.
3 - 18 | Trumpcard Ethernet LAN |
