Section Three
6.Type PCCONFIG and select ‘Network Card Settings’ and then select ‘NDIS Ethernet’.
7.At the ‘PROTOCOL.INI’ bindings prompt type OSITECH_NIF and press [F10] to save and press [ESC] to return to main menu.
8.Select ‘Login Environment Settings’, then select ‘Default Communications driver’, then select ‘NDIS Ethernet’. Press [ESC] to return to main menu and [F10] to save.
Note: | Keyword specifications associated with the NDIS driver are explained |
| in Appendix B, Error Messages in Appendix C. |
DEC PATHWORKS
To install DEC PATHWORKS version 4.1 on a DOS NDIS workstation, you can use the automated installation provided with PATHWORKS for the Ositech Trumpcard NDIS device driver.
1.Install DEC PATHWORKS using the instructions provided in the DEC PATHWORKS manual.
2.In order to set up the Trumpcard Network adapter for use with DEC PATHWORKS, please run the PATHWORKS Network setup software. (i.e. NETSETUP).
3.Choose ‘Ethernet controller type’ and select ‘Other NDIS’.
4.Insert the Trumpcard driver diskette into drive A.
5.When prompted for the path to the driver file, type :
A:\DOS\OTCETH.DOS
6.When prompted for the path to the PROTOCOL.INI file, type:
A:\DOS
3 - 4 | Trumpcard Ethernet LAN |
