Hardware Installation
Media Access Module LED Indicators
The Media Access Module has two LED indicators used to provide a visual indication of the state of the network link. The LED indicators will only be operational once the Trumpcard network driver has been loaded or during Diagnostic testing.
Activity LED (RED)
The Activity LED will flash whenever any network activity is detected by the Media Access Module. The Activity LED can be used as a simple method of determining if the Media Access Module is exchanging data with the network.
Link LED (GREEN)
The Link LED lights whenever a twisted pair connection between the Media Access Module and the 10BaseT concentrator has been made. The Link LED is not used for 10Base2 thin coax connections. If the Link LED is not lit this would indicate that a connection between the Media Access Module and the 10BaseT concentrator has not been detected. Verify the wiring and make sure that a Trumpcard network driver has been loaded.
User’sGuideandReference | 2 - 11 |
