| Appendices |
Note: | This keyword is used to disable the Link Test Function on a 10BaseT |
| network connection only. |
INT <interrupt level>
| Description: Set the interrupt level |
| Default: 5 or AUTO |
| Accepted values: Any valid interrupt value excluding 0, 1, 2, 6, 8, and 13 |
Note: | If this keyword exists, the driver will return an error when unable to |
| operate using the specified interrupt. If the keyword does not exist, the |
| default interrupt level will be 5 if Card Services is not present; |
| otherwise, the first available interrupt obtained from Card Services will |
| be used. |
MEM <memory location>
| Description: Maps to 4K host memory location |
| Default: C8000 |
Note: | When Card Services is not present (the only scenario in which this |
| keyword applies), the Trumpcard driver will require the 4K memory |
| window in order to determine the Trumpcard’s presence. If running a |
| memory manager (such as EMM386 or QEMM), make sure to exclude |
| the memory range used, i.e. |
PORT <I/O port>
| Description: Set the I/O port |
| Default: 300 or AUTO |
| Accepted values: Any location within a 64 byte boundary (300 and up in |
| increments of 40, with the upper limit dictated by the individual machine) |
Note: | If this keyword exists, the driver will return an error if unable to operate |
| using the I/O port specified. If the keyword does not exist, the default I/ |
| O port will be 300 if Card Services is not present; otherwise, the first |
| available I/O port obtained from Card Services will be used. |
NODE ADDRESS <nnnnnnnnnnnn>
Description: Station address used to override the default PROM value.
Default: None (driver uses PROM)
Accepted values: Valid hexadecimal for a Station Address according to Ethernet pattern.
User’sGuideandReference | 4 - 3 |
