Device=C\Windows\Ifshlp.Sys, Cd \Novell | Ositech comm 614006-001

Section Three

[NWLINK]

BINDINGS=OTCETH

[NETBEUI]

BINDINGS=OTCETH,XXXX

LANABASE=0

SESSIONS=10

	In your CONFIG.SYS the following line should be present:
	DEVICE=C:\WINDOWS\IFSHLP.SYS
	In your AUTOEXEC.BAT the following lines should be present:
	C:\WINDOWS\NETSTART
	CD \NOVELL
	LSL
	OTCETH
	IPXODI
	C:\WINDOWS\ODIHLP.EXE
	NETX
	Your NET.CFG file under the Novell directory would contain the
	following lines:
	LINK DRIVER OTCETH
	Frame Ethernet_802.3
	Frame Ethernet_II
	Frame Ethernet_802.2
	Frame Ethernet_SNAP
	LINK DRIVER XXXX
	Frame Ethernet_802.3
	Frame Ethernet_II
	Frame Ethernet_802.2
	Frame Ethernet_SNAP
	Link Support
	Max Boards 8
	Refer to the Installation Instructions for Novell Networks for details on
	Netware installation and setup.
Note:	If the Trumpcard is a Multi-Function adapter, additional steps may
	be required to complete the full installation. Refer to the Installation
	Guide accompanying the adapter for more details.
Note:	Keyword specifications associated with the NDIS driver are
	explained in Appendix B, Error Messages in Appendix C.

3 - 12

Trumpcard Ethernet LAN

Image 32

$Ositech comm 614006-001 Device=C\Windows\Ifshlp.Sys, Windows\Netstart, Cd \Novell, Lsl, Otceth, Ipxodi, Windows\Odihlp.Exe$

Contents

Trumpcard Ethernet LAN User’s Guide and Reference How To Contact Us Copyright Preface FCC Notice Contents Appendices Introduction Section One Trumpcard Ethernet LAN Section Two Hardware InstallationPreparing for Installation Installing the Trumpcard Ethernet LAN Connecting to 10BaseT Twisted Pair Networks Media Access Module 10BaseT Network Connection Interface Cabling and Pinout Twisted Pair Network Characteristics Concentrators Connecting to 10Base2 Thin Ethernet Networks Thin Coax Ethernet Segment Meter segments unless all LAN adapters and repeaters Thin Ethernet Network Characteristics Characteristics Standard Length Extended Length Segment Link LED Green Media Access Module LED IndicatorsActivity LED RED Section Two Operation Section Three Socket Services and Card Services Multi-Function Configuration Network Software Installation Banyan Vines \DOS\OTCETH.DOS \DOS FTP Software LanWatch DEVICE=C\DECNET\PROTMAN.SYS /IC\DECNETDEVICE=C\DECNET\OTCETH.DOS Call \DECNET\STARTNET IBM LAN Server Operation IBM LAN Support Program \LSP\NETBIND \LANMAN\NETBIND Microsoft LAN ManagerMicrosoft Windows for Workgroups \WFW\311 PATH=C\NOVELL\NET.CFG OSI$OTCETH DEVICE=C\WINDOWS\IFSHLP.SYS \WINDOWS\NETSTARTCD \NOVELL LSL Microsoft Windows NT Network PRIORITY=MS$NETBEUI MS$OTCETH$NIC Microsoft Workgroup Connection for DOS\DOS\NET Start Ndis Generic BINDINGS=MS$OTCETH$NIC LANABASE=0 Novell Netware for DOS Path Netware Netx Novell Netware for OS/2 \NETWARE\OS2\OTCETH.SYS Novell Unixware Dlpi Driver Accompanying the PC Card for more details SCO Unix LLI Driver Init Single User Mode Appendices Section Four Media media type Appendix a ODI KeywordsFrame frame type INT interrupt level MEM memory locationPort I/O port Node Address nnnnnnnnnnnn Protocol named protocol protocol id frame type Socket socket numberLook Ahead Size look ahead value Frame ETHERNET802.3 Media 10BASET Exclusive Dislink INT MEM= memory location Appendix B Ndis KeywordsMEDIA= media type INTERRUPT= interrupt level IOBASE= I/O portNETADDRESS= ‘nnnnnnnnnnnn’ SOCKET= socket number PROTOCOL.INI Example DRIVERNAME=STACK$ BINDINGS=OSITECHNIF Appendix C Messages Failed to register with Multi-Function Manager Failed to register with Card Services Unable to configure TrumpcardOnly supported on Pcmcia 2.x or higher Socket/Card Services Pcmcia adapter not found Expected Tuple not found Must be an AT .286 or higher systemHardware not responding No Media Cable Connected ODI Specific Error Messages Section Four