Operation
Netware NETX
For Netware using NETX.EXE, the Trumpcard ODI driver must be installed manually by copying the Trumpcard ODI driver (OTCETH.COM) to the directory containing the workstation software.
The Trumpcard ODI driver is located in the \NETWARE\DOS subdirectory on the Trumpcard driver diskette. In order to configure the Trumpcard ODI driver, a NET.CFG file must be created; refer to Appendix A for ODI keywords.
Netware VLM
For Netware using VLM.EXE the Trumpcard ODI driver can be installed automatically by using the Netware Client diskettes.
1.Follow the instructions in the Workstation Basics and Installation for adapter installation using the ‘Netware Client Install’. Any references to an ADAPTER OPTION DISKETTE means the Trumpcard driver diskette provided with the PC Card.
2.Proceed through steps 1, 2, and 3 of the Netware Client Install making any changes as required.
3.At STEP 4 of the Netware Client Install, press [ENTER] to install the Netware adapter driver.
4.When prompted to insert the adapter diskette, follow the instructions and Remove the Netware Client Installation Diskette from the drive. Insert the Trumpcard driver diskette. Press [ENTER].
5.Follow the instructions to select the Trumpcard ODI driver and configure the driver as required.
6.At STEP 5 press [ENTER] to install the Client software on the workstation.
End of Installation.
User’s Guide and Reference | 3 - 17 |
