MAINTANANCE
CHANGING BATTERIES
•If the low battery indicator lights up, replace batteries in the corresponding unit.
•Do not mix old and batteries.
CLEANING
The main unit and remote sensors housings can be cleaned with a damp cloth. Small parts can be cleaned with a cotton tip or
TROUBLESHOOTING
Check here before contacting customer service.
Issue | Symptom | Solution |
|
|
|
Main unit | US Atomic Time | Place unit by the window and keep it there |
| signal is not | overnight |
| received |
|
|
|
|
| Cannot locate | Check batteries |
| remote sensor |
|
Remote sensor | Check location | |
|
|
|
|
| Press and hold DOWN ( ? ) button on the |
|
| main unit to search for the signal form the |
|
| remote sensor |
|
|
|
| Data does not | Initiate manual sensor search (Press and hold |
| match data on the | DOWN ( ? ) button on the main unit) |
| main unit |
|
|
|
|
PRECAUTIONS
This product is engineered to give you years of satisfactory service if handled carefully. Here are a few precautions:
•Do not immerse the units in water.
•Do not clean the units with abrasive or corrosive materials. They may scratch the plastic parts and corrode the electronic circuits.
•Do not subject the product to excessive force, shock, dust, temperature, or humidity, which may result in malfunctions, shorter lifespan, damaged batteries, and damaged parts.
•Do not tamper with the units internal components. Doing so will invalidate the warranty and may cause damage. These units contain no
•Use only fresh batteries. Do not mix new and old batteries.
•Read the user's manual thoroughly before operating the units.
12
