the slice thickness adjustment knob back to
0. The slicer can be used to cut meat, ham, sausages, bread, vegetables or cheese. Put the food plate onto the feeder. Place the food between the food plate and the supporting plate. Then push the feeder forwards towards the blade. Move the feeder back and forward. Hold the food plate against the blade without pushing, to ensure equal sized pieces.
-Always use food carriage and food pusher
-The electrical voltage must correspond with the voltage stated on the label at the bottom of the appliance.
-When finishing slicing, unplug the unit. For safety and blade protection when storing, turn thickness adjusting knob to 0.
TO CLEAN
-Unplug slicer from outlet.
-Adjust the slice thickness adjustment knob to position before cleaning. At this position the supporting plate can be pulled out for easier cleaning.
-Always take off the blade and clean first. To clean the blade; release the knife blade, by turning the holder with the supplied tool.
Take out the blade by gripping the hole of the blade.
-The blade, food press plate, feeder, and food tray can be washed with a soft cloth or sponge and a mild soap or a spray cleaner.
-Clean the outer surface of the motor assembly with a damp cloth only. Never immerse the slicer in water. Motor never needs oiling
-Never use steel wool or scouring powder on any part of the slicer.
-After cleaning, install the blade and blade locking knob on motor assembly. Make sure the blade locking knob is properly engaged.
STORAGE
-Set the slice thickness adjustment knob to 0 position.
-The appliance should be stored away from children in a dry place.
FOR BEST RESULT
-To slice meats wafer thin, chill thoroughly before slicing.
-Meats should be boneless. Fruits should be free of seeds.
-Foods with an uneven texture - like fish and thin steaks - are often difficult to slice. Partially freeze before slicing.
-At canning time, use the slicer to quickly cut cucumbers and onions for attractive pickles. Apples for pies. Vegetables for the freezer.
ENVIRONMENTAL TIP
An electronic appliance should, when it is no longer capable of functioning be disposed of with least possible environmental damage and according to the local regulations in your municipality In most cases you can discharge the appliance at your local recycling center.
THE WARRENTY DO NOT COVER:
-if the above points have not been observed.
-if the appliance has not been properly maintained, if force has been used against it or if it has been damaged in any other way.
-errors of faults owing to defects in the distribution system.
-if the appliance has been repaired or modified or changed in any way or by any person not properly authorized.
Importer:
Adexi A/S
Adexi AB
We take reservations for printing errors.
11
