Melissa 640-061 manual Key To The Vacuum Cleaners, Parts, Preparing The Vacuum

KEY TO THE VACUUM CLEANER'S		1.
PARTS
			4.
1.	Handle	2.
2.	Air valve
3.	Telescopic tube
4.	Hose
5.	Locking mechanism	3.	11.

6.Hose connector

7. Carrying handle 6.

8.Vertical parking holder

9.	Storage compartment for special			5.	12.
	nozzles				17.
10.	Handle for opening dust bag
	container
11.	Exhaust grille
12.	Handle for removal of exhaust grille
13.	Start/stop button
14.	Suction force regulation
15.	Button for automatic cord rewind			8.	9.
16.	Bag change indicator
17.	Vertical parking holder
18.	Floor nozzle			PREPARING THE VACUUM
19.	Brush change button
				CLEANER
20.	Furniture nozzle
21.	Joint nozzle			• Fit the hose on the vacuum cleaner by
				inserting the rotating hose connection
				(6) into the vacuum cleaner until you
				hear a click. To remove the hose, press
	15.	14.	13.	the button at the side of the hose
				connection and pull it out.
				• Fit the telescopic tube (3) into the other
				end of the hose, and fit the floor nozzle
				(18) to the end of the tube.
21.				• You can adjust the length of the
				telescopic tube by pushing the locking
				mechanism (5) down and pulling in the
			16.	bottom section of the tube to a suitable
				length. When parking, shorten the tube
			20.	as far as possible.
				• The vacuum cleaner’s 2 special nozzles
7.
			10.	(20 & 21) are kept in the storage
				compartment (9). Remove the floor
18.	19.			nozzle and fit the special nozzle
				required to the end of the telescopic
				tube.

19