UK

INTRODUCTION

To get the best out of your new appliance, please read this user guide carefully before using it for the first time. Take particular note of the safety precautions. We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of your appliance.

SAFETY MEASURES

General

Incorrect use of this appliance may cause personal injury and damage.

Use for its intended purpose only. The manufacturer is not responsible for any injury or damage resulting from incorrect use or handling (see also Guarantee Terms).

For domestic use only. Not for outdoor or commercial use.

For connection to 230 V, 50 Hz only. The appliance must be earthed.

Do not immerse the motor section, cord or plug in water or any other liquid. Make sure that no liquid gets into the motor section.

Never touch the appliance, cord or plug with wet or damp hands.

Keep the appliance under constant supervision while in use. Keep an eye on children.

The appliance contains sharp parts - keep out of the reach of children.

Use only accessories supplied with the appliance or those recommended by the manufacturer.

Use

Always place the appliance on a dry, level and firm surface well away from any edges.

Only turn on the appliance when:

o the blender glass with lid has been attached and contains liquid and/or food, or

o when the centrifuge bowl, base, lid and fruit pulp holder are attached and the locking mechanism is locked in a vertical position on the lid.

Do not leave the appliance running nonstop for more than 2 minutes at a time. If the appliance has been running for 2 minutes, allow it to cool down for 2 minutes before you use it again.

Do not use the appliance if the centrifuge bowl is damaged or the lid is cracked or damaged in any way.

NEVER use your fingers, kitchen utensils or similar to push ingredients down the feed tube! Use the accompanying tamper.

NEVER stick fingers or other objects in the spout.

NEVER touch the moving parts of the appliance until it has come to a complete stop.

Never pour boiling liquid or very hot food into the blender glass. Make sure that the food has a sufficiently low temperature to avoid burning/scalding in case of skin contact.

Never add liquid or other food above the “MAX 1300 ml” mark on the blender glass.

Do not use the blender glass if it is cracked or damaged in any way.

Never put tools or your hands into the blender glass while the appliance is switched on. Please note that the blade may still rotate for a while after you switch the appliance off.

Be careful not to touch the sharp edges of the blades during use and cleaning!

Cord and plug

Do not let the cord hang out over the edge of the work surface.

Check that it is not possible to pull or trip over the cord or any extension cord.

Keep the cord and appliance away from heat sources, hot objects and naked flames.

Remove the plug from the socket before removing the lid from the appliance, before cleaning, or when the appliance is not in use. Avoid pulling the cord when removing the plug from the socket. Instead, hold the plug.

Ensure that the cord is fully extended.

The cord must not be twisted or wound around the appliance.

Check regularly that neither cord nor plug is damaged and do not use if they are, or if the appliance has been dropped or damaged in any other way.

If the appliance, cord or plug have been damaged, have them inspected and if necessary repaired by an authorised repair engineer. Never try to repair the appliance yourself. Please contact the store where you bought the appliance for repairs under guarantee. Unauthorised repairs or modifications to the appliance will invalidate the guarantee.

KEY TO MAIN COMPONENTS OF THE APPLIANCE

1.Tamper

2.Fruit pulp holder

3.Drive shaft

4.Motor section

5.Spout cover

6.Locking mechanism

7.Blender glass lid

8.Cap

9.Blender glass with scale

10.Blade

11.Spout

12.Base

13.On/off button

14.Centrifuge bowl

15.Container for skimming of juice

16.Funnel

17.Juice extractor lid

PRIOR TO FIRST USE

Before using for the first time, or after prolonged storage without use, wash any parts that will come into contact with food.

USING THE APPLIANCE

Preparing the juice extractor

1.Place the motor section (4) on a level surface, e.g. a kitchen counter, and make sure it is standing firmly on the four suction cups underneath.

2.Attach the fruit pulp holder (2) by inserting the tab on the holder into the hole on the one side of the motor section. Press until you hear a click.

3.Place the base (12) on the motor section with the spout (11) facing the side where the fruit pulp holder is attached.

4.Carefully lock the centrifuge bowl (14) onto the base.

o Be careful not to touch the sharp parts in the bottom of the centrifuge bowl. o Press the centrifuge bowl into the base as far as it goes and you hear a click. o Make sure that the centrifuge bowl doesn't sit too loosely on the base and

that it rotates evenly.

5.Place the juice extractor lid (17) on the appliance so that it covers both the fruit pulp holder and the base with the centrifuge bowl. Make sure the lid is not askew.

6.Pull the locking mechanism (6) into vertical position and press it into position over the tabs on the lid until the lid locks into place. The lock mechanism makes a clicking sound when this is done correctly.

7.Fit the cap (5) over the funnel by holding it against the side of the appliance with the small end facing upwards and press until it clicks into place.

8.Place a glass, bowl or other suitable container under the spout.

9.If required, use the supplied container for skimming of juice (15). This container has a dividing plate that separates the foam from the juice when you pour the juice into a glass.

10.The appliance is now ready for use.

Using the juice extractor

1.Plug in and switch on the power.

2.Switch on the appliance by turning the on/off button (13) to "I".

3.Feed the selected fruits and/or vegetables into the appliance through the funnel (16) a little at a time, pushing them down using the tamper (1).

o Hold the tamper so that the groove fits correctly into the funnel.

oLong vegetables such as carrots should be fed into the funnel pointy end first.

oPress the fruits and/or vegetables gently with the funnel. Too much presser reduces the amount of juice extracted and can damage the appliance.

o Stop the appliance before removing the tamper to add more fruit/vegetables in order to avoid splashes.

oKeep an eye on the fruit pulp holder and stop juicing before the holder becomes too full. Take care that the container under the funnel does not overflow.

4.Always turn off the power by turning the On/Off button to the "0" position before removing the lid.

10

Page 10
Image 10
Melissa 644-007 manual Introduction, Safety Measures, KEY to Main Components of the Appliance, Prior to First USE

644-007 specifications

Melissa 644-007 is a state-of-the-art robotic system developed to enhance productivity and efficiency in various industrial applications. This advanced machine boasts a unique design that integrates cutting-edge technologies and features, making it an invaluable asset in manufacturing, logistics, and other sectors.

One of the standout characteristics of Melissa 644-007 is its exceptional precision. The robotic arm is equipped with high-resolution sensors that allow it to perform intricate tasks with remarkable accuracy. Whether it’s assembling components on a production line or handling delicate items in a warehouse, Melissa 644-007 ensures that every movement is executed with pinpoint reliability.

In addition to precision, Melissa 644-007 incorporates artificial intelligence (AI) capabilities, facilitating adaptive learning and real-time decision-making. This AI integration enables the robot to analyze its environment, detect anomalies, and adjust its operations accordingly. As a result, the system can improve its performance over time, minimizing downtime and maximizing output.

The versatility of Melissa 644-007 is another significant advantage. It can be programmed for various tasks, ranging from material handling to quality control. This flexibility allows industries to deploy the robotic system across multiple applications, optimizing resource allocation and reducing operational costs.

Furthermore, Melissa 644-007 features an intuitive user interface that simplifies the programming and monitoring processes. Operators can easily customize the robot’s functions and schedule its tasks, enhancing the overall user experience. Additionally, the system can be integrated with existing workflows and technologies, ensuring seamless interoperability in diverse industrial environments.

Safety is a top priority with Melissa 644-007. It is equipped with multiple safety features, including emergency stop buttons, collision detection sensors, and protective barriers. These measures are designed to safeguard both the robotic system and surrounding personnel, fostering a secure working environment.

In conclusion, Melissa 644-007 represents a significant advancement in robotics, combining precision, intelligence, and versatility to meet the demands of modern industries. With its remarkable features and robust design, it stands poised to revolutionize how businesses operate, ushering in a new era of efficiency and productivity. As industries continue to evolve, Melissa 644-007 is set to play a crucial role in shaping the future of automation.