NOTE: Do not leave the appliance running nonstop for more than 2 minutes at a time. If the appliance has been running for 2 minutes, allow it to cool down for 2 minutes before you use it again.

Preparing the blender

1.Place the motor section on a level surface, e.g. a kitchen counter, and make sure it is standing firmly on the four suction cups underneath.

2.Place the blender glass (9) on the drive shaft (3) of the motor section and turn the glass counter-clockwise until it clicks into place.

3.The appliance is now ready for use.

Using the blender

1.Remove the blender glass lid (7) by turning it clockwise until the lock tabs on the edge of the lid are released, and lift off the lid.

2.Pour food into the blender glass.

o NOTE: Never add liquid or food above the “MAX 1300 ml” mark on the blender glass.

3.Replace the blender glass lid and turn it counter-clockwise until the lock tabs click into place. Check that the cap (8) is correctly fitted to the lid and seals properly.

4.Plug in and switch on the power.

5.Place a hand on the lid and switch on the appliance by turning the on/off button to “I”.

6.The appliance also has a pulsing option with extra speed.

o Turn the on/off button to “P” and hold it briefly in that position.

o When you release the button, it reverts to “0” and the appliance stops.

7.You can add more food to the blender glass during operation through the opening in the lid. Always switch off the appliance before removing the cap and adding more food.

8.Turn off the appliance by turning the On/Off button to “0” when you have finished blending. Wait until the blade (10) has come to a complete stop before removing the blender glass lid.

9.Remove the blender glass by turning it clockwise and lifting it.

NOTE:

Do not leave the appliance running nonstop for more than 2 minutes at a time. If the appliance has been running for 2 minutes, allow it to cool down for 2 minutes before you use it again.

Always add liquid to the blender glass when crushing ice cubes.

Preparing fruits and vegetables for juicing

Always wash fruits and vegetables thoroughly before juicing.

It is not necessary to remove seeds, pits or thin peels before using the appliance.

Fruits with thick peels such as oranges and lemons must be peeled before juicing. It is particularly important to remove all the peel (including the pith) on citrus fruit, as it can impart an unpleasant, bitter taste to the juice.

It is also necessary to remove large stones such as plum and apricot stones before juicing to avoid damaging the appliance.

Large fruits and vegetables should be cut into smaller pieces that fit into the funnel.

Tips!

If you line the fruit pulp holder with a plastic bag before using the appliance, it will be easier to clean the appliance.

Use fresh fruits and vegetables – they contain the most juice.

Good candidates for juicing include pineapple, apples, cucumbers, celery, carrots, spinach, melons, tomatoes and most citrus fruits.

The various varieties of apple yield juice with different flavours and consistency. Experiment and find your own favourites.

Leafy green vegetables such as cabbage and spinach can also be juiced. Roll the leaves into cylinders of an appropriate size before feeding them into the funnel.

Fibrous fruits with very firm flesh such as bananas, mangoes, papayas and avocadoes are not suitable for juicing, as the result is often mashed fruit instead of juice.

All types of juice should be consumed right after juicing, as fresh juice quickly looses important nutrients as well as taste when exposed to the oxygen in the air.

Pure apple juice turns brown quickly when exposed to air. To prevent discoloration, serve apple juice immediately after juicing or add a little lemon juice.

Remember that fruit pulp can often be used, e.g. as filling in carrot cake, vegetable lasagne, muffins, etc.

CLEANING

Remove plug from the mains socket, and allow the appliance to cool down before cleaning it.

The motor section of the appliance must not be immersed in any form of liquid.

Clean the motor section by wiping it with a damp cloth. A little detergent can be added if the appliance is heavily soiled.

Never use a scouring pad, steel wool or any form of strong solvents or abrasive cleaning agents to clean the appliance, as those may damage the outside surfaces of the appliance.

The blender glass, centrifuge bowl, base, fruit pulp holder, lid and all other detachable parts can be washed by hand or in a dishwasher. All parts must be completely dry before the appliance is assembled and used again.

Take care not to touch sharp parts at the bottom of the centrifuge bowl and the blades at the bottom of the blender glass during cleaning.

Ensure the appliance is clean and dry before storing.

INFORMATION ON DISPOSAL AND RECYCLING OF THIS PRODUCT

Please note that this Adexi product is marked with this symbol:

This means that this product must not be disposed of together with ordinary household waste, as electrical and electronic waste must be disposed of separately.

In accordance with the WEEE directive, every member state must ensure correct collection, recovery, handling and recycling of electrical and electronic waste. Private households in the EU can take used equipment to special recycling stations free of charge. In some member states you can, in certain cases, return the used equipment to the retailer from whom you purchased it, if you are purchasing new equipment. Contact your retailer, distributor or the municipal authorities for further information on what you should do with electrical and electronic waste.

GUARANTEE TERMS

The guarantee does not apply:

if the above instructions are not followed

if the appliance has been interfered with

if the appliance has been mishandled, subjected to rough treatment, or has suffered any other form of damage

If faults have arisen because of faults in your electricity supply.

Due to the constant development of our products in terms of function and design, we reserve the right to make changes to the product without warning.

FREQUENTLY ASKED QUESTIONS

If you have any questions regarding use of the appliance and cannot find the answer in this user guide, please try our website at www.adexi.eu.

Go to the "Consumer Service" menu, click on "Question & Answer" to see the most frequently asked questions.

You can also see contact details if you need to contact us for technical issues, repairs, accessories and spare parts.

IMPORTER

Adexi Group

We cannot be held responsible for any printing errors.

11

Page 11
Image 11
Melissa 644-007 manual Cleaning, Information on Disposal and Recycling of this Product, Guarantee Terms, Importer

644-007 specifications

Melissa 644-007 is a state-of-the-art robotic system developed to enhance productivity and efficiency in various industrial applications. This advanced machine boasts a unique design that integrates cutting-edge technologies and features, making it an invaluable asset in manufacturing, logistics, and other sectors.

One of the standout characteristics of Melissa 644-007 is its exceptional precision. The robotic arm is equipped with high-resolution sensors that allow it to perform intricate tasks with remarkable accuracy. Whether it’s assembling components on a production line or handling delicate items in a warehouse, Melissa 644-007 ensures that every movement is executed with pinpoint reliability.

In addition to precision, Melissa 644-007 incorporates artificial intelligence (AI) capabilities, facilitating adaptive learning and real-time decision-making. This AI integration enables the robot to analyze its environment, detect anomalies, and adjust its operations accordingly. As a result, the system can improve its performance over time, minimizing downtime and maximizing output.

The versatility of Melissa 644-007 is another significant advantage. It can be programmed for various tasks, ranging from material handling to quality control. This flexibility allows industries to deploy the robotic system across multiple applications, optimizing resource allocation and reducing operational costs.

Furthermore, Melissa 644-007 features an intuitive user interface that simplifies the programming and monitoring processes. Operators can easily customize the robot’s functions and schedule its tasks, enhancing the overall user experience. Additionally, the system can be integrated with existing workflows and technologies, ensuring seamless interoperability in diverse industrial environments.

Safety is a top priority with Melissa 644-007. It is equipped with multiple safety features, including emergency stop buttons, collision detection sensors, and protective barriers. These measures are designed to safeguard both the robotic system and surrounding personnel, fostering a secure working environment.

In conclusion, Melissa 644-007 represents a significant advancement in robotics, combining precision, intelligence, and versatility to meet the demands of modern industries. With its remarkable features and robust design, it stands poised to revolutionize how businesses operate, ushering in a new era of efficiency and productivity. As industries continue to evolve, Melissa 644-007 is set to play a crucial role in shaping the future of automation.