UK
INTRODUCTION
To get the best out of your new appliance, please read this user guide carefully before using it for the first time. We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of your appliance.
SAFETY MEASURES
General
•Incorrect use of this appliance may cause personal injury and damage.
•Use for its intended purpose only. The manufacturer is not responsible for any damage resulting from incorrect use or handling (see also the ‘Guarantee Terms’ section).
•For domestic use only. Not for outdoor or commercial use.
•For connection to 230 V, 50 Hz only.
•Do not submerge in water or any other liquid.
•Never spray steam towards other people, as it can cause serious burns and scalding.
•The appliance will become very hot during use. Never touch the sole or sides when hot to avoid risk of burns. Touch handle or buttons only.
•Always stand the appliance upright while hot.
•Never leave unattended when in use, and keep an eye on children.
•Do not cover.
•Always keep at a safe distance from combustible objects when in use.
•Allow to cool down completely and empty any remaining water before putting it away. The appliance should be kept out of the reach of children.
•Never leave in a place where the temperature might drop below freezing point.
•Protect the soleplate, and NEVER run it over metal or similar surfaces, as this will damage it.
•Do not fill water over the MAX marker. Do not add anything to the water. Ordinary tap water can be used.
Cord and plug
•Do not allow the cord to hang over the edge of a table/counter, and keep it away from hot objects and naked flames.
•Check regularly that neither cord nor plug is damaged and do not use if they are, or if the appliance has been dropped or damaged in any other way.
•If the appliance or plug is damaged, it must be inspected and if necessary, repaired by an authorised repair engineer, otherwise there is a risk of electric shock. Never try to repair the appliance yourself (see also Guarantee Terms).
•Remove the plug from the socket after use, when cleaning, when filling the water reservoir, and when left unattended.
•Avoid pulling the cord when removing the plug from the socket. Instead, hold the plug.
•Check that it is not possible to pull or trip over the cord or any extension cord.
•The cord must not be wound around the appliance.
KEY TO MAIN COMPONENTS OF THE APPARATUS
1.Spray nozzle
2.Water reservoir cover
3.Function selector
4.Steam shot button
5.Spray button
6.Display
7.Handle
8.Power cable with ball joint
9.Thermostat and indicator lamps
10.Temperature control dial
11.MAX water level mark
12.Soleplate
18
