KEY TO THE MICROWAVE OVEN’S PARTS

1.Display

2.START/RESET button

3.Micro/Defrost/Grill button

4.10 Min button

5.1 Min button

6.10 Sec button

7.Handle

a.Spindle

b.Cooking grid

c.Turning ring

d.Glass turntable

e.Dowels

PREPARING THE MICROWAVE OVEN

Each individual microwave oven is checked at the factory, but for safety’s sake, after unpacking the oven, you should check carefully that the microwave oven has not been damaged during transport. Check whether there is any visible damage (e.g. in the form of dents or similar), if the door closes properly, and if the hinges are in order. If it appears that the microwave oven has been damaged, you must contact the shop where you bought it, and do not use it until it has been checked by an authorised specialist.

Before using the microwave oven, you should check that you have removed all packaging from it both inside and outside.

Positioning the microwave

The microwave oven should be placed on a flat surface that can support its weight (15.5 kg). There must be clearance of at least 10 cm at the rear, 15 cm at the sides and 30 cm above to ensure sufficient ventilation. Do not remove the feet of the microwave oven. This oven is designed to be free-standing. Always ensure the vent holes on top of the cabinet are not covered. If they are

covered while the microwave oven is in use, there is a risk of it overheating. The microwave oven cannot then be used until it has cooled down.

Do not place the microwave oven or the cord near hot areas, for example gas rings and electric hotplates.

Connecting the microwave oven

The microwave oven must be connected to a 230-volt AC current, 50 Hz. The guarantee is not valid if the microwave oven is connected to the wrong voltage.

Inserting the glass turntable

Before using the oven, ensure the glass turntable (d) is correctly seated on its turning ring (c) and spindle (a). The glass turntable should be on the turning ring in the recess in the bottom of the microwave oven, so the pin on the spindle fits between two of the three pins in the base of the glass turntable.

Before using the oven for the first time

The first time the microwave oven is used, it may give off a little smoke and a slight odour. This is due to oil residue from production and is neither abnormal nor dangerous. To eliminate the odour, start grill programme no. 1 and leave to run for several minutes. The odour and smoke should then disappear. If not, repeat this procedure.

OPERATING THE MICROWAVE OVEN

The microwave oven is operated in the following way.

1.Place the food to be cooked in the oven and close the door.

2.Select the cooking function and power and preparation time, if relevant (described in "Cooking Times" below). Start cooking by pressing the START/RESET (2) key.

3.The oven will start and the display (1) will show cooking time remaining. Use the START/RESET key to extend cooking time while the oven is working. Each time you press the key the cooking time is extended by 1 minute. The maximum cooking time that can be set in this way is 30 minutes.

4.Use the START/RESET key to interrupt cooking at any point. This can be done even if using manual or express cooking, automatic defrosting, grill cooking or combination cooking.

•If you press and hold the key for 2 seconds, cooking will halt and the timer will be reset.

•Cooking can also be temporarily interrupted by opening the door (practical if the food needs turning).

•Cooking that has been temporarily interrupted can be resumed by pressing the START/RESET key.

5.Once the cooking time set has elapsed, the oven will switch off automatically. The display will show "00.0", and 5 beeps will sound.

Start and resetting

The following general rules apply to the START/RESET key.

When the microwave oven door is open:

•Pressing the START/RESET key will cancel the set time or selected programme.

When the microwave oven door is closed:

•Pressing the START/RESET key once will start the cooking process if a cooking programme or time has been selected.

•Pressing the START/RESET key once will resume the cooking process if it has been temporarily interrupted.

•If you press and hold the START/RESET key for 2 seconds, cooking will halt and the display will be reset.

18

Page 17 Page 19
Page 18
Image 18
Melissa 753-084 manual KEY to the Microwave OVEN’S Parts, Preparing the Microwave Oven, Operating the Microwave Oven
Page 17 Page 19

753-084 specifications

Melissa 753-084 is a cutting-edge technology designed to streamline various processes across multiple industries. This advanced system leverages state-of-the-art features that enhance efficiency, accuracy, and overall productivity.

At its core, Melissa 753-084 is powered by an intelligent algorithm that facilitates real-time data analysis. This capability allows businesses to make informed decisions quickly, thereby improving operational workflows. The system's ability to integrate seamlessly with existing software solutions is a significant advantage, as it minimizes disruption during implementation and maximizes the value derived from current assets.

One of the standout features of Melissa 753-084 is its user-friendly interface. Designed with the end-user in mind, the interface enables easy navigation and robust functionality, making it accessible for individuals at all skill levels. The comprehensive dashboard provides users with vital metrics and analytics at a glance, promoting transparency in operations.

The incorporation of artificial intelligence and machine learning technologies is another critical characteristic of Melissa 753-084. These features enable predictive analytics, allowing organizations to forecast trends and potential challenges. This proactive approach mitigates risks and allows companies to strategize effectively.

Melissa 753-084 also emphasizes data security, employing advanced encryption protocols to safeguard sensitive information. With increasing concerns over data breaches, this focus on protection instills confidence in users and clients alike.

Furthermore, the adaptability of Melissa 753-084 makes it suitable for various sectors, including finance, healthcare, and logistics. Each industry can customize the system to meet its specific needs, thereby ensuring a tailored experience.

Collaboration tools integrated within Melissa 753-084 promote teamwork and communication among users, both locally and remotely. This feature is particularly beneficial in our increasingly distributed work environments, fostering a sense of connectivity regardless of location.

In conclusion, Melissa 753-084 represents a significant advancement in technology, combining intelligent data analysis, user-friendly design, and robust security measures. Its versatility across different industries, coupled with features that enhance collaboration and efficiency, solidifies its position as a leader in innovative solutions. As businesses continue to navigate the complexities of modern operations, embracing such technologies will undoubtedly prove invaluable in achieving sustainable success.
Top Page Image Contents