LOCK FUNCTION FOR CHILDREN
1.Lock: in waiting state, press "10 min. "and "10 Sec. "buttons together, a long "beep" denotes to enter into the children- lock state and a key is lighted. LED displays a rectangle
2.Lock quitting: in locked state, press "10 min. " and "10 sec. " buttons together, a long "deep" denotes that lock is cancelled, Key indicator goes out.
STATE INQUIRING
Microwave power inquiring:
In the process of microwave cooking, press "MICRO" button, it can display the current microwave power. After three seconds, it will turn back to the former state.
In the process of
Combination cooking inquiring:
In the process of combination cooking, press "MICRO/CONV" button, the display will show the current combination type. After three seconds, it will turn back to the former state.
FAST COOKING
Press the "QUICK COOK " button one time, add one minute to cook instantly. (if the oven is under initial condition, the microwave power is 100%.)
TROUBLE SHOOTING
-Check to ensure that the oven is plugged in securely. If not, please remove the plug from the outlet and plug it in again.
-Check for a blown circuit fuse or a tripped main circuit breaker. If these seem to operating properly, try the outlet with another appliance.
-Check to see if the control panel is programmed correctly and that the timer is set.
-Check to make sure that the door is securely closed, engaging the door safety lock system.
-Check that the childproof lock is turned off. If not, turn it off by pushing the numeral pads 10 min & 1 sec at the same time. See child proof lock section above.
CLEANING
-Turn the oven off and remove the power plug from the wall socket before cleaning.
-Keep the inside if the oven clean. When food splatters or spilled liquids adhere to the oven walls, wipe with a damp cloth. Mild detergent may be used if the oven gets very dirty. The use of harsh detergent or abrasives is not recommended.
-The outside oven surface should be cleaned with a damp cloth. To prevent damage to the operating parts inside the oven, water should not be allowed to seep into the ventilation openings.
-Do not allow the control panel to become wet. Clean with a soft damp cloth. Do not use detergents, abrasives or spray on cleaners on the control panel. When cleaning the control panel, leave oven door open to prevent oven from accidentally turning on.
-If steam accumulates inside or around the outside of the oven door, wipe with a soft cloth. This may occur when the microwave oven is operated under high humidity conditions and in no way indicates malfunctions of the unit.
-It is occasionally necessary to remove the glass tray for cleaning. Wash the tray in warm sudsy water or in a dishwasher.
-The roller ring and oven cavity floor should be cleaned regularly to avoid excessive noise. Simply wipe the bottom surface of the oven with a mild detergent, water or window cleaner and then dry. The roller ring may be washed in mild sudsy water or dishwasher. Cooking vapours collect during repeated use but in no way affect the bottom surface or roller ring wheels. When removing the roller ring from cavity floor for cleaning, be sure to replace in the proper position.
-When it becomes necessary to replace the oven light, please consult a dealer to have it replaced.
ENVIRONMENTAL TIP
An electronic appliance should, when it is no longer capable of functioning be disposed of with least possible environmental damage according to the local regulations in your municipality. In most cases you can discharge the appliance at your local recycling center.
Please store the original packaging for returning to repair or other kind of transportation or storrage.
THE WARRENTY DO NOT COVER
-If the above points have not been observed.
-If the appliance has not been properly maintained.
-If force has been used against it or if it has been damaged in any other way.
-Errors or faults owing to defects in the distribution system.
-If the appliance has been repaired or modified or changed in any way or by any person not properly authorised.
Owing to our constant development of our products on both functionality and design we reserve the right to change the product without preceding notice.
IMPORTER
Adexi A/S
Adexi AB
We take reservations for printing errors.
Failure | Temp. sensor is open. Program | Temp.sensor has | Wanted temp not reach within 30 |
| temporary shut down | Program temporary shut down | min. during preheat of Convection |
|
|
|
|
Display | E1 | E2 | E3 |
|
|
|
|
Handling | The fan in the oven START to | The fan in the oven START to cool | If failure continues contact |
| cool down the cavity. Oven | down the cavity. Oven restart when | authorized personnel for repair. |
| restart when the right temp has | the right temp has been reached. |
|
|
|
|
|
20
