Mellerware 22400RDA manual Description, Important safety instructions

Read this instruction manual thoroughly before use and store it for future reference.

4. Never allow the heating base or the kettle

to make contact with or be immersed in

water. Should this happen, take the appli-

8.

(Figure 1.)

Description:

1.Cover

2.Lid open switch

3.ON/OFF Switch

4.Body

5.Handle

6.Sub base

7.Cordless base

8.Filter

1.

2. 3.

4.

5.

7.

6.

	ance to your nearest authorised service
	centre for repair.
5.	Do not operate the appliance if:
• The appliance or power cord shows any
	signs of damage,
• The appliance has been dropped.
6.	Always remove the plug from the wall
	socket:
• After each use
• In case of any malfunction
• Before undertaking any cleaning task
7.	When removing the plug from the wall
	socket, never pull on the power cord.
8.	This appliance is not intended for use by
	persons (including children) with reduced
	physical, sensory or mental capabilities, or
	lack of experience and knowledge, unless
	they have been given supervision or in-
	struction concerning use of the appliance
	by a person responsible for their safety.
9.	Do not attempt to remove any parts of the
	housing nor insert any metal objects into
	the interior of the appliance.
10.	To prevent damage to the power cable, do
	not let it pass over sharp corners or edges.
11.	Do not expose the appliance to rain or
	moisture and do not operate the appliance
	outdoors or with wet hands.
12.	Use only clean cold water.
13.	The appliance operates at very high
	temperatures and there is a danger of
	scalding from escaping water or steam. Do
	not touch any part of the kettle except the

Important safety instructions:

1.This appliance is designed for domestic use and not for commercial applications. No responsibility is accepted for damage resulting from improper use or non-compli- ance with these instructions.

2.Please keep these instructions for future reference. If the appliance is passed on to another person this instruction manual should accompany it.

3.Before inserting the plug into the wall socket, check that the mains supply volt- age and current rating corresponds with the power supply details shown on the appliance’s rating label which you will find under the base.

handle (when the appliance is in use) and

ensure that the lid has been closed prop-

erly. This appliance is designed for heating

up of water only. Never put any other liquid

into the kettle.

14. The appliance must be positioned so that

the plug is accessible.

15. If the kettle is overfilled, boiling water may

be ejected.

16. WARNING – Do not open the lid while the

water is boiling.

17. The kettle is only to be used with the base

provided.

18. CAUTION – Ensure that the kettle is

switched off before removing it from its

base.

22400RDA_IM.indd 2

2013/08/21 12:03:02 PM