- Unplug the appliance from the mains.
Thermal Safety Protector
- The appliance has a safety trip switch that pro- tects the appliance from overheating.
Cleaning
-Unplug the appliance from the mains and let it cool before starting any cleaning.
-Clean the electrical appliance and cable with a damp cloth and dry them afterwards.
NEVER SUBMERGE IN WATER OR ANY OTH- ER LIQUIDS.
-Clean the equipment with a damp cloth with a few drops of washingup liquid and then dry.
-Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.
-Never submerge the appliance in water or any other liquid or place it under running water.
-Do not let water or other liquid enter through the air holes to avoid damage in the operative interior parts of the appliance.
-It is very important to maintain the extractable filter (D) as well as the interior grille clean.
-To clean the interior grille take off the extract- able filter (D) turning it lightly in an anti clockwise direction (Fig 1).
-Once cleaning has finished place the grille in its original position by fitting the three tabs in the three slots situated on both sides of the grille while turning lightly in a clockwise direction.
Anomalies and repair
-Take the appliance to an authorised technical support service if problems arise. Do not try to dismantle or repair without assistance, as this may be dangerous.
-If the connection to the mains has been dam- aged, it must be replaced and you should pro- ceed as you would in the case of damage.
WB_20130 PRO 2000_IM.indd 4 |
|
| 5/3/2010 1:32:33 PM |
|
| ||
|
|
|
|
