Memorex MB2054 operating instructions Normal Recording

MB2054 O/M.QXD 8/12/02 11:16 AM Page 7

OPERATION

NORMAL RECORDING

This unit is capable of recording only when sound is heard. To use this feature, see the next page. For normal recording, follow steps below.

1

2	SPLP
	VOX

Make sure VOX switch on rear of unit is set to OFF. Turn the unit on, and select the desired sound quality as described on page 5.

Select a File Folder by pressing the FILE button (see page 6).

3	4	1
A B C			2
SPLP
VOX

Press the REC/STOP button and the REC indicator will light and the elapsed time will appear. Speak into the built-in microphone or insert a microphone into the MIC jack and speak into it in a normal tone of voice. Press the REC/STOP button again to stop recording.

While recording, press the PLAY/STOP button ❶ to see the remaining time available. To pause, press the PAUSE/MODE button ❷; PAUSE will blink in the display. To release pause, press the PAUSE/MODE button again.

NOTES:

•The built-in audio level automatically sets the recoding level.

•To record another message, simply repeat step 3, the message number will increase by one.

•For normal voice levels, a distance of 5-9 inches is appropriate.

7