MB2054 O/M.QXD 8/12/02 11:16 AM Page 4

POWER SOURCE

BATTERY INSTALLATION

Open the battery compartment by sliding it out and then up (the battery compartment is designed to stay attached so it cannot be lost). Insert two (2) "AAA" size batteries (not included) following the polarity diagram. Put the battery compartment cover back into place.

+ — +

BATTERY INDICATORS:

: The batteries are fresh.

: The batteries are weak or dead, replace.

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

4

Page 5
Image 5
Memorex MB2054 operating instructions Power Source, Battery Installation