Xerox 4520mp manual You have a HCF installed. You want to load as much paper

		S e l e c t i n g a P a p e r S o u r c e
Example 2	You have a HCF installed. You want to load as much paper in
	the printer as possible. You use only one size of paper.
	1.	Load the HCF, upper, middle, and lower trays with
		regular paper stock.
	2.	Set Source Mapping for “Upper” to “HCF-Up-Mid-Low.”
	3.	In either your software application or the Xerox printer
		driver, set paper source to the upper tray.

The printer will pull paper from the HCF until it is empty, then from the upper tray until is it empty, then from the middle tray until it is empty, and finally from the lower tray. As soon as the HCF, upper, or middle tray is reloaded, the printer will pull paper from them again.

C h a p t e r 2 : H a n d l i n g P a p e r ❖ 2-37