Xerox 4520mp manual You do not have a HCF installed. You want to print mostly on

S e l e c t i n g a P a p e r S o u r c e

Example 3	You do not have a HCF installed. You want to print mostly on
	Letter (8.5 x 11) paper but sometimes on Legal (8.5 x 14).
	1.	Load the upper and middle trays with Letter paper stock.
	2.	Load the lower tray with Legal paper stock.
	3.	Set Source Mapping for “Upper” to “Upper-Middle.”
	4.	Set Source Mapping for “Lower” to “Lower.”
	5.	In either your software application or the Xerox printer
		driver, set paper source to:

— Upper tray for Letter pages.

— Lower tray for Legal pages.

The printer will pull Letter paper from the upper tray until is it empty, then from the middle tray. It will pull Legal paper from the lower tray.

Alternatively, you could set Source Mapping for “Upper” to “Up-Mid-Low” and set your application paper source to the upper tray for both Letter and Legal pages. The printer will automatically switch between the trays according to the paper size requested. The disadvantage is that Control Panel messages may be misleading. Whether alerting you to load Letter or Legal paper, the Control Panel will always display “Up-Mid-Low” as the location to load that paper size. You must know which paper size goes into which tray.

2-38❖ 4 5 2 0 / 4 5 2 0 m p U s e r ’ s G u i d e