Xerox 4520mp manual You do not have a MBF or HCF installed. You want to print

S e l e c t i n g a P a p e r S o u r c e

Example 5	You do not have a MBF or HCF installed. You want to print
	mostly on white A4 paper but sometimes on color A4 paper.
	You occasionally print on DL envelopes.
	1.	Load the upper and middle trays with white A4 paper
		stock.
	2.	Load the lower tray with color A4 paper stock.
	3.	Set Source Mapping for “Upper” to “Upper-Middle.”
	4.	Set Source Mapping for “Lower” to “Lower.”
	5.	Set Source Mapping for “Manual” and “Manual
		Envelope” to “Manual.”
	6.	In either your software application or the Xerox printer
		driver, set paper source to:
		— Upper tray for A4 pages (white stock).
		— Lower tray for A4 pages (color stock).
		— Manual for DL envelopes. (You could have also set

paper source to Manual Envelope for DL envelopes.)

The printer will pull white A4 paper from the upper tray until it is empty and then from the middle tray. It will pull color A4 pages from the lower tray. For each DL envelope, the printer halts and the Control Panel displays a message requesting a DL envelope to be manually fed through the SBF. Insert one envelope into the SBF and it will feed.

2-40❖ 4 5 2 0 / 4 5 2 0 m p U s e r ’ s G u i d e