Xerox 4520mp manual A d i n g P a p e r

d

c

e To assure that the sheet is being introduced without skew, apply pressure first on one side of the sheet and then the other such that the entire lead edge of the sheet makes full contact.

f Maintain slight pressure on the sheet until the printer begins to pull in the sheet.

Continue to insert the sheet until the lead edge of the sheet makes contact and a slight buckle forms.

Insert the sheet, guided by the side guides, at a steady rate.

For best performance:

a Stand facing the SBF straight on.

b Refer to Figure 2.12 (page 2-26) for the proper paper orientation (long edge or short edge first).

L o a d i n g P a p e r

2

Insert only one sheet of paper, pre-printed stationery, transparency, label paper, or envelope at a time into the SBF.

If you are feeding letterhead, pre-printed stationery, or drilled paper, see page 2-27. See page 2-29 for envelopes.

C h a p t e r 2 : H a n d l i n g P a p e r ❖ 2-25