Xerox 4520mp manual PCL Paper Base Model With MBF With HCF With Hcef Source, Lower

S e l e c t i n g a P a p e r S o u r c e

Factory-Set Source Mapping Settings

Figure 2.18 shows the factory-set Source Mapping defaults for the six PCL paper sources, and how the settings change when the optional MBF, HCF, or HCEF is installed and Reset Menus is implemented. See Chapter 3: Using the Control Panel, “Reset Menu” (page 3-67).

Figure 2.18 Factory settings for Source Mapping

PCL Paper	Base Model	With MBF	With HCF	With HCEF
Source
Upper	Up-Mid-Low	Up-Mid-Low	HCF-Up-Mid-Low	Up-Mid-Low
Manual	Manual	MBF	Manual	HCEF
Manual Envelope	Manual	MBF	Manual	HCEF
Lower	Lower	Lower	Lower	Lower
Large Capacity	Up-Mid-Low	Up-Mid-Low	HCF	Up-Mid-Low
Envelope Feeder	Manual	MBF	Manual	HCEF

Only one of the SBF, MBF, HCF, or HCEF may be installed at any time. Manual single-sheet feeding is possible with the SBF, MBF, and HCF, but not the HCEF.

Note

Install the Xerox printer driver to access the entire range of PCL paper source and source mapping settings specifically designed for the 4520/4520mp printers. Refer to the Document Services for Printing Guide.

C h a p t e r 2 : H a n d l i n g P a p e r ❖ 2-35