Xerox 4520mp manual Port Timeout

		I n t e r f a c e M e n u
Figure 3.15 Ethernet Menu options showing factory settings
Option	Setting	Description
Port Timeout	5-999 secs (30*)	Time interval for determining when to end an
		incomplete print job and poll the next port in the
		polling sequence.
		Port Timeout works in conjunction with Auto Job
		End (page 3-54).
		See Appendix C: I/O Port Polling for more
		information.
System Language	PCL*	Page description language (PDL) the printer will use
	PostScript†	for print jobs coming through the Ethernet port.
	† Appears only when the	When Lang. Sensing (page 3-53) is On, System
	PostScript option is	Language is used only when the printer cannot
	installed.
		detect the PDL used in the incoming print job.
Lang. Sensing	Off	Automatic recognition of the page description
	On*	language (PDL) used in an incoming print job.
		When On, if the Ethernet port receives print jobs of
		different PDLs—such as a PostScript print job followed
		by a PCL print job—it can automatically sense which
		PDL the print job is using. It does this by sampling the
		incoming data stream, then switching to the
		perceived language for that job or to the System
		Language setting if it fails to sense the language.
		When On, if State Saving (page 3-28) in the PCL
		Menu or State Saving (page 3-37) in the PostScript
		Menu is also On, the permanently downloaded fonts
		and macros are saved in memory, eliminating the time
		to download them again when switching occurs
		between PDLs.

C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l ❖ 3-53