Xerox 4520mp manual Open Hcef Cover Clear Paper Path Paper Jam MBF, Paper Fed From, Upper Tray

P a p e r J a m s

Figure 7.4 lists control panel messages associated with paper jam clearing procedures along with an explanation of each message. To clear a paper jam message you should do the following:

•Locate the correct control panel message in Figure 7.4.

•Perform, in sequence, all the steps indicated.

Figure 7.4 Paper jam procedures

Message Displayed on	Message Explanation	Steps to Clear Jam
Control Panel
Open HCF Cover	A feed command was sent to the	2, 2a, 2b, 2c (page 7-32)
Clear Paper Path	High-Capacity Feeder or High-Capacity	5, 5a, 5b (page 7-36)
	Envelope Feeder, but paper did not arrive at
or		6, 6a, 6b (page 7-37)
	the input sensor.
Open HCEF Cover		7 (page 7-39)
Clear Paper Path
Paper Jam MBF	A paper jam has occurred while feeding	1b (page 7-30)
Clear Paper Path	form the MBF. The paper did not reach the	5, 5a, 5b (page 7-36)
	input sensor.
		6, 6a, 6b (page 7-37)
		7 (page 7-39)
Open Rear Cover	A paper jam has occurred as paper was	3, 3a, 3b, 3c (page 7-34)
Clear Paper Path	leaving a paper tray or a manual feed tray, or	4, 4a, 4b (page 7-35)
	immediately after leaving the paper tray or
alternating with		5, 5a, 5b (page 7-36)
	manual feed tray.
Paper Fed From		6, 6a, 6b (page 7-39)
Upper Tray		7 (page 7-39)
(or Middle Tray or Lower Tray)

C h a p t e r 7 : T r o u b l e s h o o t i n g ❖ 7-29