Xerox 4520mp manual Adjusting the Print Density

A d j u s t i n g t h e P r i n t D e n s i t y

Adjusting the Print Density

The print density was adjusted at the factory to provide optimum print quality and does not normally require any adjustment. Should you desire to darken or lighten the print density, perform the following procedure:

1

2

Open the top cover by pressing the top cover release latch.

Raise the green handle on the paper transport cover and locate the print density adjustment knob at the right rear of the printer. Turn the knob to the right (clockwise) for darker prints, or to the left (counterclockwise) for lighter prints.

6-12❖ 4 5 2 0 / 4 5 2 0 m p U s e r ’ s G u i d e