Xerox 4520mp manual Unfused or partially, Fused image, Skewed prints

P r i n t Q u a l i t y P r o b l e m s

Figure 7.6 Print Quality Problems (continued)

Problem		Possible Causes		Corrective Actions
Unfused or partially	1.	Damp paper stock	1.	Replace paper stock.
fused image	2.	Heavy or unusual paper stock	2.	Refer to Chapter 2 for printer
The printed image is not	3.	Light image density		throughput capabilities.
fully fused to the paper			3.	Replace EP cartridge.
and easily rubs off.	4.	Defective Fuser Module	4.	Contact your dealer or Xerox / Rank
				Xerox.

Skewed prints	1.	Paper improperly loaded into	1.	Check trays for proper paper loading
Printed image is not		paper tray		(see Chapter 2).
	2.	Obstructed paper path	2.	Inspect paper path for obstructions
parallel to the edge of
the paper.				(torn pieces of paper, etc.).
	3.	Contaminated paper path	3.	Inspect/clean paper path to remove
				residual toner and paper dust.
	4.	Dirty/worn Paper Feed Rolls	4.	Contact your dealer or Xerox / Rank
				Xerox.

7-48❖ 4 5 2 0 / 4 5 2 0 m p U s e r ’ s G u i d e