Xerox 4520mp manual Option Setting Description, Copies, Font Source, Internal

P C L M e n u

Figure 3.8 PCL Menu options showing factory settings

Option	Setting	Description
Copies	1* - 99	Number of times each page is printed.
		Most software applications override this setting. If
		your application does not, the printer assumes the
		default setting here.
Font Source	Internal*	Location of the default font in PCL.
	Upper†	Internal refers to the font set residing in the printer’s
	Lower†
		permanent memory. These fonts are resident in the
	Soft†
		printer and cannot be altered.
		Upper and Lower refer to the two font card slots and
		appear only when a font card is installed in a slot. See
		Chapter 1: Introduction (page 1-3) for location of the
		font card slots.
		When a font card contains its own default font, the
		current Font Source setting is overridden. You must
		change the Font Source setting if you do not want to
		use the default font on the font card.
		Soft refers to fonts permanently downloaded to either
		printer memory or to a printer hard disk. Soft appears
		only if there is a permanently downloaded font.
		The Font Source setting returns to its
		factory setting (“Internal”) if Symbol Set
		Note (page 3-25) is changed.
		If the Font Source setting specifies a
		location other than “Internal,” Font
		Number (page 3-20) reverts to 0
	† Upper and Lower appear	automatically.
	only when a font card is
	installed. Soft appears
	when there is a
	downloaded font.

C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l ❖ 3-19