Xerox 4520mp manual Port Type

		I n t e r f a c e M e n u
Figure 3.13 Serial Menu options showing factory settings (continued)
Option	Setting	Description
Port Type	RS232*	Serial interface standard.
	RS422
Baud Rate	38400	Speed at which data is transferred.
	19200	Baud rate translates approximately to bits per
	9600*
		second.
	4800
	2400
	1200
		The serial port Baud Rate setting must
	600
		match the host computer baud rate
	300
		Note setting.
		Your software application may set the
		baud rate. If not, use the DOS MODE
		command to modify the baud rate on
		the host computer. Refer to your DOS
		documentation for more information.
Handshake	Robust XON*	Data flow control. (Flow control, also known as
	XON	handshaking, is the cooperation between the host
	Hardware	computer and printer for data transfer. XON signals
		the host computer to send more data. XOFF is the
		converse signal that tells the host computer to stop
		and wait.)
		Robust XON sends the XON signal continuously.
		Robust XON helps ensure that handshaking works
		with a host computer that fails to receive the XON
		signal.
		XON sends the signal only once.
		Hardware is used when the host computer cannot
		operate in XON/XOFF handshaking mode. Hardware
		requires a cable with the DTR (Data Terminal
		Ready) pin connection enabled.

C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l ❖ 3-49