Source Mapping

P C L M e n u

Figure 3.8 PCL Menu options showing factory settings (continued)

Option		Setting	Description

Source Mapping	Upper		Source Mapping enables you to control from your
Options (Paper Sources):	Middle		software application the location from which the
Options (Paper Sources):	Lower		printer pulls paper.
	Lower		printer pulls paper.
Upper	Upper-Middle		Each of the six paper sources that can be requested
Manual	Upper-Lower		Each of the six paper sources that can be requested
Manual	Upper-Lower		through your application maps to one of the Source
Manual Envelope	Middle-Lower		through your application maps to one of the Source
Manual Envelope	Middle-Lower		Mapping settings.
Lower	Up-Mid-Low		Mapping settings.
Lower	Up-Mid-Low		Lower is the factory setting for the Lower paper
Large Capacity	Manual†		Lower is the factory setting for the Lower paper
Envelope Feeder	MBF‡		source. Up-Mid-Lowis the factory setting for Upper
	HCEF‡		and Large Capacity. Manual is the factory setting for
	HCEF-Upper‡		Manual, Manual Envelope, and Envelope Feeder. See
	HCEF-Middle‡		Figure 2.18 (page 2-35)for a table of factory settings.
	HCEF-Lower‡		When a paper source (e.g., Upper) is mapped to a
	HCEF-Up-Mid‡		When a paper source (e.g., Upper) is mapped to a
	HCEF-Up-Mid‡		sequence of trays (e.g., Up-Mid-Low), the printer may
	HCEF-Up-Low‡		sequence of trays (e.g., Up-Mid-Low), the printer may
	HCEF-Up-Low‡		switch between them for two purposes:
	HCEF-Mid-Low‡		switch between them for two purposes:
	HCEF-Mid-Low‡		1) To increase paper capacity.
	HCEF-Up-Mid-Low‡		1) To increase paper capacity.
	HCF‡		When the current tray becomes empty, the
	HCF-Upper‡		When the current tray becomes empty, the
	HCF-Upper‡		printer automatically switches to the next tray in
	HCF-Middle‡		printer automatically switches to the next tray in
	HCF-Middle‡		the sequence, provided the paper size is the
	HCF-Lower‡		the sequence, provided the paper size is the
	HCF-Lower‡		same. For large print jobs, this gives time to
	HCF-Up-Mid‡		same. For large print jobs, this gives time to
	HCF-Up-Mid‡		reload paper in a tray without the printing being
	HCF-Up-Low‡		reload paper in a tray without the printing being
	HCF-Up-Low‡		interrupted.
	HCF-Mid-Low‡		interrupted.
	HCF-Mid-Low‡		2) To search for the correct paper size to print a
	HCF-Up-Mid-Low‡		2) To search for the correct paper size to print a
			page.
			If the paper size speciﬁed in your software
			application does not match what is loaded in the
			current tray, the printer automatically searches
			the next tray in the sequence for a paper size that
	†	Appears only when the	matches.
	†	Appears only when the
	‡	SBF is installed.	For more information on taking full advantage of
	‡	Appears only when the	Source Mapping and for detailed examples of usage,
		option is installed.	Source Mapping and for detailed examples of usage,
		option is installed.	see “Selecting a Paper Source” (page 2-30).
			see “Selecting a Paper Source” (page 2-30).

3-22❖ 4 5 2 0 / 4 5 2 0 m p U s e r ’ s G u i d e

Xerox 4520mp manual Source Mapping

Models: 4520 4520mp

Figure 3.8 PCL Menu options showing factory settings (continued)

Option

HCEF‡

Figure 2.18 (page 2-35)for a table of factory settings.

HCF‡