Xerox 4520mp manual Disk Spooling†, Power Saver, 60 min

S y s t e m M e n u

Figure 3.18 System Menu options showing factory settings (continued)

Option	Setting	Description
Disk Spooling†	Off*	Use of hard disk (if installed) for spooling of print jobs.
	On	When On, data received and waiting to be processed
		from the parallel or serial ports is spooled onto the
		hard disk and later retrieved for processing.
		When Off, data received and waiting to be processed
		is kept in printer memory. Set Disk Spooling to Off to
† Appears only when the		save time if spooling is already done outside the
hard disk option is		printer.
installed.
Power Saver	15 min.	The Xerox 4520/4520mp printers conform to EPA
Note: This option is only	30 min.	Energy Star guidelines. The printer will enter a low
	60 min.*	power state after 60 minutes of inactivity. This
available for firmware
	90 min.	timeout is adjustable to 15, 30, 60 or 90 minutes via
releases 4.06 and higher.
To determine the firmware		this option.
release of your printer,		When in the low power state, the printer displays
print a Configuration
Sheet.		Power Saver On on the Control Panel. When a
		print job is received while in the power saver mode,
		the printer may require up to 30 seconds of warm up
		time before the first sheet is fed from the input tray.

3-62❖ 4 5 2 0 / 4 5 2 0 m p U s e r ’ s G u i d e