Xerox 4520mp manual Auto Continue

				S y s t e m M e n u
Figure 3.18 System Menu options showing factory settings (continued)
Option	Setting		Description
Auto Continue	Off*	Control of the resumption of printing after system
	On	errors occur.
		Certain errors may occur that halt printer operations.
		Two examples are:
		Out of Memory
		and
		Page Too Complex.
		When Auto Continue is Off, the printer does not
		automatically resume. Enter		must be pressed
		before normal printer operations can continue.
		When Auto Continue is On, the printer automatically
		resumes operation after certain system errors if
		Enter	is not pressed within ten seconds. The
		On setting is useful in a networked environment.
Defaults	Europe	Control of default paper size settings in various
	USA	menus.
		There is no standard factory-set default for this
		option; the default varies by world region.
		When Europe, all paper size-related options are set to
		A4 (210x297) and Form Length is set to 64.
		When USA, all paper size-related options are set to
		Letter (8.5x11) and Form Length is set to 60.
		The Config. Sheet (page 3-64) is printed at Defaults
		size, regardless of actual paper size.
			Perform a Reset Menus (page 3-68) after
			changing Defaults.
		Note

C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l ❖ 3-61