Xerox 4520mp Press a key, Press ↑ to init, Press ↓ to Abort, Processing, Printing, Ready

D i s p l a y e d C o n t r o l P a n e l M e s s a g e s

Figure 7.2 Control Panel messages (continued)

Message		Description/Action
Power Saver	Power consumption is reduced by means of the power saver mode.
On	When no printing has occurred for 60 minutes, the printer will automatically go
	into Power Saver mode.
	ACTION: None. Treat this message just as you would the message:
	Online	___
	Ready
Press *	The printer has a PCL error.
	ACTION: Press Enter
	This message functions with the System Menu option Auto Continue
	(page 3-59). When Auto Continue is On, this message is cleared automatically
	after ten seconds, and normal printing operation resumes.
Press a key...	The printer has just been taken offline.
	ACTION: No more processing can take place until you press another key (any key).
Press ↑ to init	Either the hard disk’s partition block cannot be understood or it has a bad high
Press ↓ to Abort	level format.
	This message flashes alternately with either:
	Unknown Disk
	or
	Disk Format Bad
Processing...	Printer is processing data from a computer for printing.
	ACTION: None
PS Font List	List of PostScript fonts (page 3-65) is printing.
Printing...	ACTION: None
Ready	Printer is online and waiting for data to print.
	ACTION: None
Ready to Print	The print engine is not communicating with the system controller.
	ACTION: Inspect the system controller to ensure that all wire harness connections
	are plugged in. If they are not, contact your dealer or Xerox / Rank Xerox.
Remove Paper	Manual bypass slot (SBF or MBF) has a sheet inserted.
From Bypass	ACTION: Remove the sheet so that paper can be fed from a different tray.

7-16❖ 4 5 2 0 / 4 5 2 0 m p U s e r ’ s G u i d e