Xerox 4520mp manual Loading Envelopes

L o a d i n g P a p e r

Loading Envelopes

Figure 2.15 illustrates the envelope orientation needed to print COM-10, DL, or C5 envelopes.

Figure 2.15 Loading envelopes

1.Adjust the guides to the desired envelope size.

Make sure that they are snug against both sides of the envelope but not too tight as to buckle it.

2.Insert only one envelope at a time into the SBF. For best performance:

—Stand facing the SBF straight on.

—Insert the envelope (refer to Figure 2.15), guided by the side guides, at a steady rate.

—Continue to insert the envelope until its lead edge makes contact and a slight buckle forms. Apply pressure first on one side of the envelope and then the other so that the lead edge makes full contact.

—Maintain slight pressure on the envelope until the printer begins to pull in the envelope.

To print envelopes, use the high-capacity envelope feeder (HCEF), SBF, or MBF only.

Note

C h a p t e r 2 : H a n d l i n g P a p e r ❖ 2-29