Memorex MB2054 operating instructions Voice Activated VOX Recording

MB2054 O/M.QXD 8/12/02 11:16 AM Page 8

OPERATION

VOICE ACTIVATED (VOX) RECORDING

Voice activated recording will allow dictation only when you speak. When the unit detects a pause of a few seconds, it will temporarily stop recording until it detects sound again.

1

2	SPLP
	VOX

Slide the VOX switch on rear of unit to the ON position. Turn the unit on, and select the desired sound quality as described on page 5.

Select a File Folder by pressing the FILE button (see page 6).

3

A B C

SPLP

VOX

Press the REC/STOP button and the REC indicator will light and the elapsed time will appear. Speak into the built-in microphone or insert a microphone into the MIC jack and when the unit picks up sound, it will record. Press the REC/STOP button again to stop recording.

NOTES:

•The first few sounds activate the recorder and may not be recorded.

•A variation in voice level during recording will not stop the unit, 2 seconds of silence is required to stop the recording.

•For constant recording, see previous page.

•To pause, press the PAUSE/ MODE button.

•The built-in audio level automatically sets the recoding level.

•For normal voice levels, a distance of 5-9 inches is appropriate.

8