Memorex MC4285 Manually Storing Numbers Into Memory, Manually Dialing Numbers in Memory

MC4285.O/M.QXD 1/3/02 1:36 PM Page 13

TELEPHONE OPERATION (CONTINUED)

MANUALLY STORING NUMBERS INTO MEMORY

This telephone is equipped with 13 memories for programming your most frequently dialed telephone numbers.

1
2
3	1

2	1
	3
	2

Press the STORE button ❶, then enter the telephone number to be stored using the key buttons (0–9) ❷ (no tone will be heard, but the number will be in memory). Press the REDIAL button ❸ to insert a pause where needed, such as dialing a 9, then needing a pause before the number is dialed.

Then press the desired memory location ( M1, M2, M3 ❶), or to put in memory locations 0-9, simply press the MEMORY ❷ button, followed by key button 0-9❸. Repeat steps 1 and 2 to program more numbers.

NOTE:

To erase a stored telephone number, simply store a new number over it by following the steps above.

MANUALLY DIALING NUMBERS IN MEMORY

1

2

2

1

ONE TOUCH MEMORIES (M1, M2, M3) Pick up the handset and press one of the one touch memory buttons (M1, M2, M3) and the phone will automatically dial the stored telephone number.

TWO TOUCH MEMORIES (0-9) Pick up the handset and press the MEMORY button ❶ followed by the desired two touch memory button (0-9)

❷and the phone will automatically dial the stored telephone number.

13