OPERATION (CONTINUED)
TO PLAY A CD
1 | 1 |
| 2 |
Press the POWER button 1 to turn the unit on and insert a CD as described on the previous page. Press the Play/Pause (®p)/CD button 2 to select CD; the total number of tracks and playing time will appear in the display, then playback will start automatically.
2 |
If in the Stop mode, press the Play/ Pause (®p)/CD button to start play- back. TO PAUSE PLAYBACK, press the Play/Pause (®p)/CD button again; the elapsed track time will blink in the display for a few seconds, then the time will appear and the track number will blink. Press again to resume playback.
3 |
|
2 | 1 |
4 | 1 | 1 |
| 2 |
|
To skip forward or backward through the tracks on the disc, press the Tune/Skip/ Search/Min n 1 or Hr o 2 button. To search forward or backward through the tracks on the disc, press and hold the Tune/Skip/Search/Min n 1 or Hr o 2 button.
Adjust the VOLUME buttons 1 as desired. When the disc is through play- ing, it will stop. Press the STOP (■)/CLOCK SET BUTTON 2 to stop the disc before it is finished.
FAQS: Do I need an adapter to play 3” singles?
No, simply insert the 3” single into the groove.
What is the maximum time for a CD in this unit?
The maximum time is 74 minutes.
NOTES:
•If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will show, “NO DISC”.
•When you press the Tune/Skip/Search/Min n or Hr o button or the Pause button, the track elapsed time will appear for a few seconds then revert back to the time display and the track number will appear.
10
