OPERATION
TO LISTEN TO THE RADIO
1 | 1 | 2 |
|
2 |
|
2 | 1 |
Press the POWER button 1 to turn the unit on. Press the RADIO/BAND button 2 to select radio. Repeatedly press the RADIO/BAND button 2 to select AM or FM.
MANUAL TUNING: Repeatedly press the Tune/Skip/Search/Min n1 or Hr o2 button to manually advance the frequency in the display up or down until the desired frequen- cy appears. The display will revert back to the time display after a few seconds.
3 |
|
2 | 1 |
4 |
AUTOMATIC TUNING: Press and hold the Tune/Skip/Search/Min n 1 or Hr o
2button until the frequency in the dis- play starts to scan, and then release the button; the tuner will search and then stop on the next strong station it finds. Repeat this step until the desired frequency appears in the display. The display will revert back to the time dis- play after a few seconds.
Adjust the VOLUME buttons as desired. When listening to an FM radio station that is broadcasting in Stereo, the Stereo ( 
) indicator will appear. If the radio broadcast is not strong enough or not in stereo, the Stereo ( 
) indicator will not appear in the dis- play.
Antennas
FM: Unravel and extend the FM antenna wire for best reception.
AM: Turn the unit for better AM reception.
8
