OPERATION (CONTINUED)
MAKING A TAPE RECORDING
This unit allows you to make direct recordings from the radio or CD player to a blank cas- sette. An automatic recording volume level control (ALC) circuit will automatically control the volume level of your recordings to prevent distortion.
Open Surface Side
Open the cassette door and insert a good quality blank cassette tape into the slots on the door, with the open end facing up and the full reel on the right side. Close the cassette door.
When you are ready to begin recording, press the RECORD ( ) button. The PLAY ( ) button will also engageQ . The tape will begin√ moving and all of the material from your selected source will be recorded on the tape.
5
When you are finished recording, press the STOP/EJECT ( ) button to
stop the tape. r
15
Slide the Function switch to select the function you wish to record, either CD or Radio, and operate that function according to its own instructions.
To avoid recording unwanted material, such as radio commercials, use the PAUSE ( ) button to stop the recording temporarily. Release the PAUSE ( )
button to begin recording again. p
6
3 |
|
2 | 4 |
If you wish to listen to your recording immedi- ately, press the REWIND (®®) button 1 until the tape rewinds to the beginning, then press the STOP/EJECT (r) button 2. Slide the FUNCTION switch to select TAPE/OFF then press the PLAY (√)3button 4 to begin playback.
