Memorex MP3223 manual To Repeatedly Play Back One Track/All Tracks, Programmed Playback

MP3223.QXD 3/3/03 9:53 AM Page 10

TO REPEATEDLY PLAY BACK ONE TRACK/ALL TRACKS

1
1	3	2
		4

2

1

2

3

To repeat a single track, press the REPEAT/MEM-UP button ❶ once while in the Stop mode; REPEAT will blink in the display. Press the TUNING/SKIP/Search UP ❷ or DOWN ❸ button to select the specific track that you wish to repeat. When the desired track number appears in the display, press the PLAY/PAUSE ( ) button ❹ to begin playback. The specific track you selected will be repeated continuously. You can press the REPEAT/MEM-UP button

❶once during playback to repeat the current track continuously.

To repeat all of the tracks on a disc continuously, press the REPEAT/MEM-UP button ❶ twice while in the Stop mode; REPEAT will appear in the display. Press the PLAY/PAUSE ( ) button ❷ to begin playback; all the tracks on the CD will repeat continuously.

To cancel Repeat Playback, press the REPEAT/MEM-UP button until the Repeat indicator disappears from the display.

PROGRAMMED PLAYBACK

The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks on any disc for playback in any desired order. You may program 20 different tracks or you may also program certain tracks to play more than once.

To perform programmed playback, proceed as follows:

1

1

2

2

3

Press the POWER ON/OFF button ❶ to turn the unit on. Press the CD Function button ❷ to select the CD mode.

Open the CD compartment lid by pressing the CD Door OPEN/ CLOSE area and insert your disc in the CD player. Close the CD compartment door.

Press the MEMORY/CLOCK ADJ button; “P-01” (Program Number) and “1” (track number) will appear and “MEMORY” will blink in the display.

PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.

10