MP3223.QXD 3/3/03 9:53 AM Page 12
SETTING THE TIMER
Set the timer to turn the unit on to the Tuner or CD mode at a preset time as follows :
1 |
|
1 | 2 |
2 |
|
|
3 | 2 | 1 |
|
3 |
2 |
With the power off, press and hold the TIMER/SLEEP button ❶ until “TIMER” blinks in the display. Immediately press and hold the MEMORY/CLOCK ADJ button ❷ until the hours blink in the display.
Press the TUNING/SKIP/Search UP ❶ or DOWN ❷ button to set the hour, then press the MEMORY/CLOCK ADJ button ❸ again; the minute digits will blink. Press the TUNING/SKIP/Search UP ❶ or DOWN ❷ button to set the minutes, then press the MEMORY/CLOCK ADJ button ❸ again.
Within a few seconds, “TIMER” will light in the display to indicate that the timer is set. When the actual time matches the time set for the Timer, the unit will turn on to the last function (CD or tuner) used.
TO TURN THE TIMER OFF AND SET IT FOR THE NEXT DAY, press the POWER ON/OFF button
❶.
TO TURN THE TIMER OFF SO IT IS NOT SET FOR THE NEXT DAY, press and hold the TIMER/SLEEP button ❷ again until “TIMER” disappears from the display.
The unit will revert back to standby mode one hour after the timer has been activated.
ACTIVATING THE SLEEP FUNCTION
Set the sleep timer as follows:
1 |
2 |
3 |
Press the POWER ON/OFF button to turn the unit on and tune the desired radio station or insert a CD as previously instructed.
Press the TIMER/SLEEP button and “90” will appear and “SLEEP” will blink in the display.
Press the TIMER/SLEEP button a second time to set the unit to turn off after 80 minutes. Each additional press with decrease the sleep time by 10 minutes. After five seconds the sleep timer is set, “SLEEP” will appear in the display, you can press the TIMER/SLEEP button at any time to stop the Sleep function; “SLEEP” will disappear from the display.
12
