Philips PRI39IXI manual Timeractme on CHANNEL12, UP or Cursor Down buttons

C2

--Vour television comes with an

I onscreen clock. During normal operation the clock appears on the screen when the STATUS/EXIT but- ton is pressed or when channel changes occur

<_ Press the CLOCK button on the remote to display the onscreen CLOCK menu.

<_;_ Press the CURSOR UP • OR CURSOR DOWN • buttons until the words SET CLOCK are high-

ghted,

<_ Enter the current time using the NUMBERED buttons. If the first number is a single digit first enter a zero then the di,g,lt (i.e., press "0 , then press 8 ).

@Press the CURSOR RIGHT • or CURSOR LEVI" • buttons to set either AM or PM time.

Note: The CLOCK onscreen menu can also be accessed through the main menu by pressing the MENU button; then scrolling up/down with the CURSOR UP • or CURSOR DOWN • buttons until

the word CLOCK is highlighted. Press the CURSOR RIGHT • button to activate the CLOCK

menu and follow the steps above to set the time.

@

Remember: Be sure to

tli press "0" first and then the

hour number for single digit entries.

To clear the onscreen menu press the STATUS/EXIT button or wait a

few seconds after you have finished

your adjustment and the menu will automatically disappear from the

screen.

[SET OJXX

qlMER ACTIVE ON

CHANNEL12

ISETCt_0CK 10:00 AMI

TIMERACTME ON

CHANNEL12

		TVts CLOCK will have to be reset.
		If no time is set, the time will not
		Note: If a power failure occurs, the
		appear oascreen.
		Note: The CLOCK onscreen menu can
• tram	_m	also be accessed throughthe main menu
©©		by pressing the MENU button; then
lotto	_	scrolling up/down with the CURSOR
		UP • or CURSOR DOWN • buttons
		until the word CLOCK is highlighted.
		Press the CURSOR RIGHT • button
		to activatethe CLOCK menuand follow
		the steps above to set the time.

18