yhur Cable TV input into your ome may be a single (75
ohm) cable, or a Converter Box installation. In either case the
connection to the 71/is very easy.
Just put the threaded end of the
cable signal to the TV's antenna
plug and screw it down tight.
<_Ifyour Cable TV signal is a sin-
gle round cable (75 ohm) then you're ready to connect to the TV. If you have a Cable Converter
Box:
Connect the Cable TV signal to the
Cable Signal IN(pu0 plug on the
Converter..
<_ | Connect the Cable TV cable to the |
| 75_1 plug on the TV. |
| If you have a Cable Converter Box: |
| Connect the OUT(pat) plug from the |
| Converter to the 75'_ plug on the TV. |
O
i
I
Cable TV Company
75,Q
75_) Ohm
Cable TV Converter
Box Connection
Remember: !
Set the TV for the
type signal you've
just connected (see the "Tuner section
on page 11 of this manual.)
To select only the channel numbers on
your Cable system see "Auto Program" (page 12). If you use a Cable Converter
box, set the TV to the same channel as the
converter's CH 3/4 switch (on the rear of the converter.)
v,0E0
IN
