combination antenna receives Lnormal broadcast channels
(VHF
goes.
<_ lfyour antenna has a round cable (75 ohm) on the end, then you're ready to connect it to the TV.
If your antenna has flat
wire (300 ohm), you first need to attach the antenna wires to the screws
on a 300 to 75 ohm adapter.
<_ Push the round end of the
adapter (or antenna) onto the 75sq plug on the rear of the TV. If the round end of the antenna wire is
threaded, screw it down tight.
@
Note: For homes with separate UHF and VHF antennas you will need an optionalcombiner to connect to the TV.
u/v
Combiner
<.
Remember:
Be sure to set the TV for the type sig- nal you've connect- ed (see the "Tuner" section on page I 1 of this manual.)
To set the TV to
Iselect only the chan- nel numbers in your area see how to
"Program" or "Add" channels in the TV's memory on page 12 (Auto Program sec- tion).
To order any option- al accessory contact your dealer or the
Philips Parts Center at
Combination VHF/UHF
Antenna
(Outdoor or Indoor)
Twin Lead
Wire
VIDEOAUDIO_(_ _N
Round Cable
75f2
6
