![](/images/new-backgrounds/1327407/32740717x1.webp)
INSTALLATION (CONTINUED)
AC OPERATION
To operate the unit using AC power, connect an AC adapter (not included) to an AC outlet having 120V, 60Hz AC only. Plug the small end into the DC 4.5V jack on the side of the unit and connect the other end into the AC outlet. The batteries are automatically disconnected when the AC adapter is used.
CAUTION: When not using AC power, disconnect the AC adapter from the wall outlet by pulling the plug (not the cord). Do not touch the AC adapter with wet hands. Fully insert the plug without exposing any part of the blade.
DC 4.5V – ![](/images/new-backgrounds/1327407/32740717xi2.webp)
+
Sound Through a Home Audio System
By using a home audio connection cable (not included), superb sound can be heard through your home audio system. Before making any connections, turn off the power to all equipment.
Plug a connection cable (not included) between the LINE OUT jack on the side of the CD player and the amplifier’s AUX or CD input jack. (Do not connect it to the amplifier’s PHONO jack.)
NOTE: If the radio interferes with TV reception, move the unit away from the TV or turn off the power to this unit.
HOLD SWITCH
Slide the HOLD switch until “HOLD” appears in the display and no buttons can be pressed. After three seconds, “HOLD” will disappear in the display. If you press any button, “HOLD” will appear in the display again to indicate the button is disabled. This is useful when jogging/walking. Slide the HOLD switch to the off position to cancel the Hold function.
8