Samsung PS-50P2HT manual Switching On and Off, Viewing the Menus and Displays

Switching On and Off

ENG

Front panel

The mains lead is attached to the rear of the PDP.

☛If you have purchased this PDP in the United Kingdom, refer to page 55 for further instructions on plug wiring.

1Plug the mains lead into an appropriate socket.

➢The main voltage is indicated on the rear of the display and the frequency is 50 or 60Hz.

2Press the POWER ( ) button on the front panel or remote control to switch the display on.

➣ If your Monitor isn’t turned on when the power button is

pressed...

press the SELECT button to check if the Monitor mode has been chosen.

Viewing the Menus and Displays

Your PDP has a simple, easy-to-use menu system that appears on the PDP screen. This system makes it convenient and fast to use features on the PDP. Your PDP also lets you display the status of many of your PDP’s features.

1 With the power on, press the Menu button on the remote control. The main menu appears on the screen.

2 Use the joystick (up, down) button to the move items in the menu. Use the joystick (left, right) button to display, change, or use the selected items. Press the joystick button to enter items in the menu. On screen menus disappear from the screen automatically after about thirty seconds, or you can press the Menu button on the remote control to exit the menu.

16