Samsung PS-50P2HT manual PC Input Mode, Standard Dot x Line Vertical Horizontal

PC Input Mode (42”)

ENG

Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported:

Standard	Dot x Line	Vertical	Horizontal	Vertical	Horizontal
		frequency (Hz)	frequency (kHz)	polarity	polarity
VGA	640 x 480	85.0	43.3	N	N
		75.0	37.5	N	N
		72.8	37.9	N	N
		59.9	31.5	N	N
	720 x 400	70.1	31.5	P	N
SVGA	800 x 600	85.1	53.7	P	P
		75.0	46.9	P	P
		72.2	48.1	P	P
		60.3	37.9	P	P
		56.3	35.2	P	P
XGA	1024 x 768	85.0	68.7	P	P
		75.0	60.0	P	P
		70.1	56.5	N	N
		60.0	48.3	N	N

(N: Negative / P: Positive)

◆The interlace mode is not supported.

◆The PDP might operate abnormally if a non-standard video format is selected.

◆The 4:3 mode does not work with input signals from “720 x 400”.

Notes

◆The text quality of PC screen is optimum in the VGA mode (640 x 480), the full size displayed PC mode is optimum in the SVGA mode (800 x 600).

◆When this PDP is used as a PC display, 24-bit color is supported (over 16 million colors).

◆Your PC display screen might appear different depending on the manufacturer (and your particular version of Windows). Check your PC instruction book for information about connecting your PC to a PDP.

◆If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHz (horizontal).

In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If so, press the Source button to enter the Video mode. Also, make sure that the PC is connected.

◆When connecting a notebook PC to the PDP, make sure that the PC screen is displayed through only the PDP monitor (Otherwise, random signals might appear).

◆When horizontal synchronous signals seem irregular in PC mode, check PC power saving mode or cable connections.

35