Samsung PS-50P2HT Setting up Your Display Plug and Play, Setting up Your PC Software Windows only

Setting up Your Display Plug and Play

ENG

Our adoption of the new VESA® Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system without the usual hassles and confusion. Your PC system can easily identify and configure itself for use with your display. This monitor automatically tells the PC system its Extended Display Identification data (EDID) using Display Data Channel (DDC) protocols.

Setting up Your PC Software (Windows only)

The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card.

On the windows screen, select in the following sequence:

Start ➞ Settings ➞ Control Panel.

When the control panel screen appears, click on Display and a display dialog-box will appear.

Select the Settings tab in the display dialog-box.

The two key variables that apply the PDP-PC interface are “Resolution” and “Colors”.

The correct settings for these two variables are:

◆ Size (sometimes called “Resolution”) 1024 x 768 pixels.

◆ Color 24-bitcolor

(might also be expressed as “16 million colors”) Shown at left is a typical screen for Display dialog box.

If a vertical-frequency option exists on your display settings dialog box, the correct value is 60 or 60 Hz. Otherwise, just click OK and exit the dialog box.

34